Communicate with Supplier? Supplier
Jack Mr. Jack
What can I do for you?
Chat Now Contact Supplier
Yongjia South Trading Co.,Ltd

Cast Steel Valves - manufacturer, factory, supplier from China

(Total 24 Products for Cast Steel Valves)

  • Forged Steel High Pressure Globe Valve

    Forged Steel High Pressure Globe Valve

    • Brand: OEM

    • Packaging: Plywood Boxes

    • Min. Order: 1 Set/Sets

    • Model No.: J961Y

    The power station globe valve ordered from one power plant in South Asia had dispatched to site on Sep 2018 Such high pressure globe valve normally with valve diamter 2 and below which used for bypass streaming valve The high pressure stream globe valve are working under 607 at 165 bar with wholely forged alloy steel...

    Contact Now

  • Pressure Seal Carbon Steel Gate Valve

    Pressure Seal Carbon Steel Gate Valve

    • Brand: OEM

    • Packaging: Plywood Boxes

    • Min. Order: 1 Set/Sets

    • Model No.: Z960Y

    Pressure seal gate valve our factory produced are for power plant in South Asia which dispatched on September 2018 The gate valve with pressure seal type in WCB carbon steel The max working temperature and working pressure for such power station valve upto 243 at 208 bar The BW gate valve shipped with bare stem and...

    Contact Now

  • Duplex Steel Dual Plate Check Valve

    Duplex Steel Dual Plate Check Valve

    • Packaging: Plywood Boxes

    • Min. Order: 1 Set/Sets

    • Model No.: H74H

    • Place of Origin: PR China

    Duplex steel dual plate check valve in 4A 5A material which is suitable for corrosion working medium such as sea water oil acid gas etc The valve function is to protect pumps and actuator from any damages caused by working medium back flow which widely used in all type system of water treatment chemical industry and...

    Contact Now

  • Large Diameter Carbon Steel Gate Valve

    Large Diameter Carbon Steel Gate Valve

    • Packaging: Plywood Boxes

    • Min. Order: 1 Set/Sets

    • Model No.: Z940H

    • Place of Origin: PR China

    DN1000 GOST standard gate valve is max size our factory design and manufactured for Russia market The pressure will be PN16 and PN25 Wedge gate valve material can be low temperature steel such as LCB LCC LC1 carbon steel such as WCB The construciton structureof flange gate valve is same as other bolt bonnet gate valve...

    Contact Now

  • Forged Steel Gate Valve Class 4500

    Forged Steel Gate Valve Class 4500

    • Packaging: Plywood Boxes

    • Min. Order: 1 Set/Sets

    • Model No.: Z960Y

    • Place of Origin: PR China

    Class 4500 forged steel gate valve we manufactured can meet the requirements of super critical power station unit 1000MW One piece valve body have better uniform structure better density higher strength integrity and closer dimensional tolerances than casted valve body The pressure of pressure seal gate valve is from...

    Contact Now

  • API600 Cast Steel Gate Valve

    API600 Cast Steel Gate Valve

    • Packaging: Plywood Boxes

    • Min. Order: 1 Set/Sets

    • Model No.: Z40H

    • Place of Origin: PR China

    Gate Valves are primarily designed to start or stop flow and when a straight line flow of fluid and minimum flow restriction are needed In service flange gate valves generally are either fully open or fully closed The disk of a wedeg gate valve is completely removed when the valve is fully open the disk is fully drawn...

    Contact Now

  • HIgh Pressure Casted Gate Valve

    HIgh Pressure Casted Gate Valve

    • Brand: OEM

    • Packaging: Plywood Boxes

    • Supply Ability: 5,000 to 10,000 sets

    • Min. Order: 1 Set/Sets

    High pressure gate valve with pressure seal bonnet rising stem outside screw yoke metal to metal seat wedge disc with cover stellite as well as seat and back seat Pressure seal gate valve normally used in the high pressure main streaming pipeline or high pressure bypass water feeding pipeline etc The main function of...

    Contact Now

  • DIN Stainless Steel Gate Valve

    DIN Stainless Steel Gate Valve

    • Packaging: Plywood Boxes

    • Min. Order: 1 Set/Sets

    • Model No.: Z40H

    • Place of Origin: PR China

    The material of DIN stainless steel gate valve covers CF8 CF8M CF3M etc in casted steel and they are suitable for corrosive working medium such as oil acid DIN gate valve with bolted bonnet type outside screw and yoke rising stem and non rising handwheel flexible wedge fully guided metal to metal seat overlaying...

    Contact Now

  • Stainless Steel Gate Valve

    Stainless Steel Gate Valve

    • Packaging: Plywood Boxes

    • Min. Order: 1 Set/Sets

    • Model No.: Z940H

    • Place of Origin: PR China

    The material of stainless steel gate valve covers CF8 CF8M CF3M etc in casted steel and they are suitable for corrosive working medium such as oil acid Gate valves vertically partition the path of the fluid using a gated structure creating a straight line flow of fluid Although these wedge gate valves keep pressure...

    Contact Now

  • Gear Operated Forged Steel Gate Valve

    Gear Operated Forged Steel Gate Valve

    • Packaging: Plywood Boxes

    • Min. Order: 1 Set/Sets

    • Model No.: Z560Y

    • Place of Origin: PR China

    Forged steel gate valve can be operated by gearbox electric actuator or pneumatic actuator which have more advantages than casted steel gate valve such as more uniform structure dimensional metallurgical uniformity Quallity forgings from qualified foundry can meet the special requirements of high temperature and high...

    Contact Now

  • Forged Steel High Pressure Gate Valve

    Forged Steel High Pressure Gate Valve

    • Brand: OEM

    • Packaging: Plywood Boxes

    • Supply Ability: 5,000 to 10,000 sets

    • Min. Order: 1 Set/Sets

    Forged steel high pressure valve our factory supplied completes valve size 2 1 2 to 24 and widely applied for HP HT service upto class 4500 and 650 Pressure seal gate valve are designed to turn the flow of a liquid on or off by restricting or opening the flow with a round or rectangular wedge High pressure gate valve...

    Contact Now

  • Forged Steel Trunnion Ball Valve

    Forged Steel Trunnion Ball Valve

    • Packaging: Plywood Boxes

    • Min. Order: 1 Set/Sets

    • Model No.: Q547F

    • Place of Origin: PR China

    Forged steel trunnion ball valve are offered in 2 pcs side entry 3 pcs side entry design in a wide range of carbon steeel stainless steel materil The trunnion ball valve are manufactued according to API 6D design and fire safe tested perAPI 607 standard Forged ball valve are manufactured and tested in accordance with...

    Contact Now

  • Wholely Casted Basket Type Strainer

    Wholely Casted Basket Type Strainer

    • Packaging: Plywood Boxes

    • Min. Order: 1 Set/Sets

    • Model No.: SB4P

    • Place of Origin: PR China

    The design and manufacture standard of wholely casted basket type strainer can be ANSI and API with body materil in carbon steel stainless steel alloy steel scuh as WCB WC6 WC9 CF8 CF8M etc Valve maxium pressure our factory can manufactured upto to class 1500 as well as valve size 20 Basket type strainer are usually...

    Contact Now

  • DIN Standard Casted Y Type Strainer

    DIN Standard Casted Y Type Strainer

    • Packaging: Plywood Boxes

    • Min. Order: 10 Set/Sets

    • Model No.: SY4P

    • Place of Origin: PR China

    DIN casted Y type strainer covers body material in 1 0619 1 0319 1 4308 1 4408 1 4401 etc which installed in gaseous services such as steam air nitrogen natural gas etc Y Strainers are typically used in applications where the amount of solids to be removed is small and where frequent clean out is not required Y type...

    Contact Now

  • DIN 1.4408 Casted Y Type Strainer

    DIN 1.4408 Casted Y Type Strainer

    • Model No.: SY4P

    • Place of Origin: PR China

    DIN casted Y type strainer covers body material in 1 4408 1 4401 as well as other carbon steel and stainless steel body material in DIN standard Industrial strainers should retain all particles greater than those acceptable to the downstream equipment Straining too fine may cause operational and maintenance problems...

    Contact Now

  • Stainless Steel Y Strainer

    Stainless Steel Y Strainer

    • Packaging: Plywood Boxes

    • Min. Order: 10 Set/Sets

    • Model No.: SY4P

    • Place of Origin: PR China

    The degree of straining is usually decided by the process design engineer These decisions are usually based upon the engineer s process flow expertise and the recommendations of the manufacturer of the equipment to be protected The industrial strainer itself is a simple device to operate and with minimal maintenance...

    Contact Now

  • Carbon Steel Y Type Strainer

    Carbon Steel Y Type Strainer

    • Packaging: Plywood Boxes

    • Min. Order: 10 Set/Sets

    • Model No.: SY4P

    • Place of Origin: PR China

    Carbon steel Y type strainer covers body materil in WCB WCC LCB LCC etc and based on ANSI or API standard with one piece casted body which have advantages in easy cleaness easy disassembling on line as well as easy maintenance Valve pressure is from class 150 to class 1500 matching valve size from 1 2 to 24 CastedY...

    Contact Now

  • Casted Steel T Type Industrial Strainer

    Casted Steel T Type Industrial Strainer

    • Packaging: Plywood Boxes

    • Min. Order: 1 Set/Sets

    • Model No.: ST4P

    • Place of Origin: PR China

    Casted steelT type strainer covers body material in carbon steel stainless steel such as WCB CF8 CF8M etc The design and manufacture standard of T type strainer can be DIN API ANSI Such type of T type strainer are usually installed on the inlet of valve relief valve or any other decivices to filtering solid particles...

    Contact Now

  • Forged Steel Y Type Strainer

    Forged Steel Y Type Strainer

    • Packaging: Plywood Boxes

    • Min. Order: 1 Set/Sets

    • Model No.: SY6P

    • Place of Origin: PR China

    Forged steel Y type strainer we provided with ANSI standard Forged steel Y type strainer we produced can cover size from 1 2 to 2 matching with pressure class 800 to class 1500 which widely used in hot oil system power station natuaral gas pipeline water cycle system etc The advantages of Y type stariner we provided...

    Contact Now

  • Cast Steel Floating Ball Valve

    Cast Steel Floating Ball Valve

    • Packaging: Plywood Boxes

    • Min. Order: 1 Set/Sets

    • Model No.: Q541F

    • Place of Origin: PR China

    The ball of floating ball valve is moveable not fixed by a trunnion inside the valve body it drifts toward to the downstream side and tightly pushes against the seat under the medium pressure to ensure sealing reliability The floating ball valve is 2 pieces or 3 pieces body with split body full port for pigging...

    Contact Now

  • Casted Steel Trunnion Ball Valve

    Casted Steel Trunnion Ball Valve

    • Packaging: Plywood Boxes

    • Min. Order: 1 Set/Sets

    • Model No.: Q547F

    • Place of Origin: PR China

    Casted steel trunnion mounted ball valves have a bottom entry stem design where the stem is inserted from inside the body The higher the line pressure the tighter the seal An elastomer seal in the form of an o ring is located at the lower end of the stem which provides the first level of protection to the atmosphere...

    Contact Now

  • Stainless Steel LIft Check Valve

    Stainless Steel LIft Check Valve

    • Packaging: Plywood Boxes

    • Min. Order: 1 Set/Sets

    • Model No.: H41H

    • Place of Origin: PR China

    Stainless steel lift check valve with lift spring loaded disc bolted cover internal hinge pin renewable seat and one way flow control design in DIN3356 standard also called piston check valve Lift check valve are essentially globe valves without the stem and top works allowing the disc to respond to flow rates and...

    Contact Now

  • Duplex Steel Bolt Bonnet Globe Valve

    Duplex Steel Bolt Bonnet Globe Valve

    • Packaging: Plywood Boxes

    • Min. Order: 1 Set/Sets

    • Model No.: J41H

    • Place of Origin: PR China

    The material of duplex steel globe valve covers 4A 5A etc in casted steel and they are suitable for corrosive working medium such as oil acid sea water Valve structure is same as other bolt bonnet globe valve flat and regulating disc OS Y rising stem operated by manual or actuator Such type of globe valve is the best...

    Contact Now

  • Forged Steel Y Type Lift Check Valve

    Forged Steel Y Type Lift Check Valve

    • Packaging: Plywood Boxes

    • Min. Order: 10 Set/Sets

    • Model No.: H41H

    • Place of Origin: PR China

    Forged Steel Y Type Lift Check Valve with swing disc piston disc full port conventional port bolt bonnet welded bonnet and pressure seal bonnet socket weld SW threaded butt welded BW and flanged end The size of lift check valve is from 1 2 to 2 as well as pressure class 150 to class 2500 Valve material covers carbon...

    Contact Now

Review

Michael Gibb

Oct 28, 2019 4

Excellent service, shipped very fast, the Cast Steel Valves was well packaged and arrived with zero damage. I will Recommend the seller highly. Thank You Yongjia South Trading Co.,Ltd For Excellent Customer Service.
Sakher Al-asfar

Oct 19, 2019 4

this is definitely the best Yongjia South Trading Co.,Ltd to buy.
Elaine Ng

Oct 12, 2019 5

Very fast delivery. Ask in advance the Cast Steel Valves manufacturer to send instructions. I didn't expect that it would be so good. Customer service is very patient. Recommend!
We're commitment to offer the aggressive value ,remarkable products top quality, also as fast delivery for Cast Steel Valves , Casted Steel Valve , Cast Steel Gate Valve , we're going to provide you with a surprice for Qulity and Price tag.
We thinks what customers think, the urgency of urgency to act in the interests of a customer position of principle, allowing for better quality, lower processing costs, prices are more reasonable, won the new and old customers the support and affirmation for Cast Steel Valves , Casted Steel Valve , Cast Steel Gate Valve , We're seeking the chances to meet all the friends from both at home and abroad for the win-win cooperation. We sincerely hope to have long-term cooperation with all of you on the bases of mutual benefit and common development.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.