Review
  • “Excellent. very well packaged goods.”
    Mr.ioannis Giantzoglou
    lsi controls
  • “Well packing, good quality! Thank you! It's so cool!We will buy more Split Body Floating Ball Valve in the future.”
    Choy Pio Sui
    Onbeyo
  • “This is my second Split Body Floating Ball Valve of these.”
    Cristhian Pantoja
    1000 Квартир, агентство недвижимости
  • “The Split Body Floating Ball Valve was more than I had expected. Note: This product was packaged well with all pieces intact.”
    Manuel De Sousa
    3dreamalize
  • “These are PERFECT! You may purchase them with complete confidence!”
    Mr.sandi Zgajnar
    American Packaging Group

Split Body Floating Ball Valve

- manufacturer, factory, supplier from China

(Total 12 Products for Split Body Floating Ball Valve)

  • Lever Opearted Floating Ball Valve

    Lever Opearted Floating Ball Valve

    • Packaging: Plywood Boxes
    • Min. Order: 1 Set/Sets
    • Model No.: Q41H
    • Place of Origin: PR China

    Ball valve is a quarter-turn rotational motion valve that uses a ball-shaped disk to stop or start flow. If the valve is opened, the ball rotates to a point where the hole through the ball is in line with the valve body inlet and outlet. If the valve is closed, the ball is rotated so that the hole is perpendicular to...

    Contact Now

  • Split Body Floating Ball Valve

    Split Body Floating Ball Valve

    • Packaging: Plywood Boxes
    • Min. Order: 1 Set/Sets
    • Place of Origin: PR China
    • Transportation: Ocean,Land,Air

    Split ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it. The valve is open when the ball's hole is in line with the flow and closed when it is pivoted 90 degrees by the valve lever. The lever lies flat in alignment with the flow when valve open, and...

    Contact Now

  • Bare Shaft Floating 2 PCS Casted Ball Valve

    Bare Shaft Floating 2 PCS Casted Ball Valve

    • Packaging: Standard Export Package
    • Model No.: Q41
    • Place of Origin: Wenzhou
    • Transportation: Ocean,Air

    A ball valve is a form of quarter-turn valve which uses a hollow, or solid, perforated and pivoting ball to control flow through it. It is open when the ball's hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle. The handle lies flat in alignment with the flow when open, and is...

    Contact Now

  • Valve Forging Components-Forging Body

    Valve Forging Components-Forging Body

    • Packaging: Plywood Boxes
    • Min. Order: 1 Set/Sets
    • Place of Origin: PR China
    • Transportation: Ocean,Land,Air

    Forged steel is used in a variety of industries. Everything from manufacturing to pharmaceuticals utilize the benefits of forged steel. Anything that can be made of metal can generally be made stronger and more weight-conscious by forged steel. The bonus of forged steel is that the metal becomes stronger than...

    Contact Now

  • Rough Manchining Forged Valve Body

    Rough Manchining Forged Valve Body

    • Packaging: Plywood Boxes
    • Min. Order: 1 Set/Sets
    • Place of Origin: PR China
    • Transportation: Ocean,Land,Air

    Our factory can provide wholely forging valve materil, such as forging body, bonnet, retainer, flanges etc with raw material or semi-finished products. Materical can covers carbon steel, stainless steel, alloy steel, duplex steel which normally working for the industrial pipe line with requirements of high pressure...

    Contact Now

  • Casted Steel Floating Ball Valve

    Casted Steel Floating Ball Valve

    • Packaging: Plywood Boxes
    • Min. Order: 10 Set/Sets
    • Model No.: Q41F
    • Place of Origin: PR China

    Casted Steel floating ball valve used to shut off or connect medium of pipeline, such as water, chemical solvent, acid, or natual gas etc. Floating ball vavle usually suitable for small size and low pressure system with advantages of simple design valve structure , blow-out proof stem, easy maintenance, stable sealing...

    Contact Now

  • Ball Valve Components Ball

    Ball Valve Components Ball

    • Packaging: Plywood Boxes
    • Min. Order: 10 Set/Sets
    • Transportation: Ocean,Land,Air

    The technology process of the ball our factory manufactured as below: Process degisn, Raw material purchasing, Heat treatment, forging, Rough machining, Heat treatment, Semi-finish machining, Surface hardening treatment, Finish machining, Grinding, Finished Product, Stock. Ball surface hardening treatment with coating...

    Contact Now

  • Cast Steel Floating Ball Valve

    Cast Steel Floating Ball Valve

    • Packaging: Plywood Boxes
    • Min. Order: 1 Set/Sets
    • Model No.: Q541F
    • Place of Origin: PR China

    The ball of floating ball valve is moveable(not fixed by a trunnion) inside the valve body, it drifts toward to the downstream side and tightly pushes against the seat under the medium pressure to ensure sealing reliability. The floating ball valve is 2 pieces or 3 pieces body with split body, full port for pigging...

    Contact Now

  • Side Entry Cryogenic Ball Valve

    Side Entry Cryogenic Ball Valve

    • Brand: OEM
    • Packaging: Plywood Boxes
    • Min. Order: 1 Piece/Pieces
    • Place of Origin: PR China

    Side entry cryogenic ball valve is designed and manufactured in floating type with full bore, anti-static design, automatic pressure relief etc which have advantages like high flow capacity and tight shut off, low torque and smooth operation, excellent seat and seal with min. leakage, high safety and long service life...

    Contact Now

  • Top Entry Casted Floating Ball Valve

    Top Entry Casted Floating Ball Valve

    • Packaging: Standard Export Package
    • Place of Origin: Wenzhou
    • Transportation: Ocean,Land,Air

    Cast steel Top entry Ball Valve are offered in top entry design in a wide range of carbon steeel, stainless steel materil. The Ball Valve are manufactued according to API 6D design and fire safe tested perAPI 607 standard. Forged ball valve are manufactured and tested in accordance with respective API, ASME, and ANSI...

    Contact Now

  • Gear Operated 3 PCS Casted Steel Ball Valve

    Gear Operated 3 PCS Casted Steel Ball Valve

    • Packaging: Standard Export Package
    • Place of Origin: Wenzhou
    • Transportation: Ocean,Air

    Trunnion Ball Valve is fixed, it does not move with medium pressure and trunnion ball vale has floating seats. The seats move with the medium pressure to tight the ball and seal ring to ensure sealing reliability. Bearings could be mounted in top shaft and bottom shaft, which reduces operation torque. A special...

    Contact Now

  • PTFE Seal Ball Valve

    PTFE Seal Ball Valve

    • Packaging: Plywood
    • Supply Ability: 100
    • Min. Order: 1 Set/Sets
    • Model No.: Q41F150LB

    F317L forged ball valve, 150Lb, flanged ends, bare shaft, with top flange for actuator

    Contact Now

  • Related Information

High Quality Products

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Home > Split Body Floating Ball Valve
Related Products List

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send