All Products (Total 136 Products)
Packaging: Plywood Boxes
Min. Order: 10 Set/Sets
Model No.: SY4P
DIN casted Y type strainer covers body material in 1.0619, 1.0319, 1.4308, 1.4408, 1.4401 etc which installed in gaseous services such as steam, air, nitrogen, natural gas etc. Y-Strainers are typically used in applications where the amount of solids to be removed is small, and where frequent clean-out is not...
Packaging: Plywood Boxes
Min. Order: 10 Set/Sets
Model No.: SY4P
DIN Y type rod telescopic strainer is made up of Y type strainer and extension union joint. It is mainly used as water discharge fittings of high-rise buildings, multi-story bulidings and factories to filtering solid particles of the working medium so that making sure all pipeline equipments operation in good...
DIN casted Y type strainer covers body material in 1.4408, 1.4401 as well as other carbon steel and stainless steel body material in DIN standard. Industrial strainers should retain all particles greater than those acceptable to the downstream equipment. Straining too fine may cause operational and maintenance...
Packaging: Plywood Boxes
Min. Order: 10 Set/Sets
Model No.: SY4P
The degree of straining is usually decided by the process design engineer. These decisions are usually based upon the engineer`s process flow expertise and the recommendations of the manufacturer of the equipment to be protected. The industrial strainer itself is a simple device to operate and, with minimal...
Packaging: Plywood Boxes
Min. Order: 10 Set/Sets
Model No.: SY4P
Carbon steel Y type strainer covers body materil in WCB, WCC, LCB, LCC etc and based on ANSI or API standard with one piece casted body which have advantages in easy cleaness, easy disassembling on line as well as easy maintenance. Valve pressure is from class 150 to class 1500 matching valve size from 1/2" to 24"....
Packaging: Plywood Boxes
Min. Order: 1 Set/Sets
Model No.: ST4P
WPB T type strainer we provided with ANSI standard, DIN standard, API standard which are usually installed on the low pressure pipeline to filtering solid particles of the working medium and to protecting all pipeline equipments from any brokens. T type strainer we produced can cover size from 1/2"(DN15) to 24"(DN600)...
Packaging: Plywood Boxes
Min. Order: 1 Set/Sets
Model No.: ST4P
Casted steelT type strainer covers body material in carbon steel, stainless steel, such as WCB, CF8, CF8M etc. The design and manufacture standard of T type strainer can be DIN, API, ANSI. Such type of T type strainer are usually installed on the inlet of valve, relief valve or any other decivices to filtering solid...
Packaging: Plywood Boxes
Min. Order: 1 Set/Sets
Ball with PTA material coating have excellent performance in high temperature resistance(up to 800℃), corrosion resistant(related metal coating to be avaiable for various corrosive work conditions), wear resistance(service life is 5 times more than traditional process:chrome plating). Ball with PTA materil has...
Packaging: Plywood Boxes
Min. Order: 1 Set/Sets
Ball with supersonic spraying material coatings protect valves and actuators against wear, erosion, chemical attack and other forces that threaten their durability and effectiveness. Ball with supersonic spraying material(HVOF) has characteristics as below sheet. Furthermore, HVOF is widely used in energy, glass,...
Packaging: Plywood Boxes
Min. Order: 1 Set/Sets
Metal seal ball valve have advantages including full bore, small height, quick opening and closing and two-way sealing, but also has the advantages of stop valve, includes good sealing performance, high-temperature and high pressure-resistant, and advantages of gate valve, including small opening and closing moment...
Packaging: Plywood Boxes
Min. Order: 1 Set/Sets
Each performance index of the hard seal ball valve with ordinary ball outside, also has high temperature resistance, wear resistance and double entry into, exit from the sealing function, of which two block is equipped with the outlet one-way sealing, the stainless steel spring to adjust the seat, the valve torque is...
Packaging: Plywood Boxes
Min. Order: 1 Set/Sets
High temperature trunnion ball valves are manufactured according to the API 6D standard and in an API 6D certified facility. These valves provide the exceptional performance in even the most stringent applications found in the Oil & Gas industry and other industries. These trunnion ball valves are designed to be...
Packaging: Plywood Boxes
Min. Order: 1 Set/Sets
Top entry trunnion mounted ball valve are designed, engineered and manufactured especially for oil and gas pipeline application. Manufactured at our API certified facility, all trunnion ball valves provide excellent corrosion resistance and superior sealing performance at both high and low pressures. Trunnion ball...
Packaging: Plywood Boxes
Min. Order: 1 Set/Sets
Model No.: Q647F
Pneumatic actuated trunnion mounted ball are 2 pieces construction type, split body, side entry, in bolted execution, self relieving spring energized seats and suitable for double block and bleed performance. Valve seats abaiable inlubricated or non lubricated execution with differnet solutions of sealing and fire...
Packaging: Plywood Boxes
Min. Order: 1 Set/Sets
Model No.: Q567Y
Metal seal trunnion ball valve with 3 pieces split body, metal to metal seated which operated by worm gear or actuators. Forged material carbon steel, stainless steel, alloy steel or special steel are avaiable according to the requirements of working pressure and temperature in the pipeline of power plant,...
Packaging: Plywood Boxes
Min. Order: 10 Set/Sets
The technology process of the ball our factory manufactured as below: Process degisn, Raw material purchasing, Heat treatment, forging, Rough machining, Heat treatment, Semi-finish machining, Surface hardening treatment, Finish machining, Grinding, Finished Product, Stock. Ball surface hardening treatment with coating...
Packaging: Plywood Boxes
Min. Order: 1 Set/Sets
Forged steel is used in a variety of industries. Everything from manufacturing to pharmaceuticals utilize the benefits of forged steel. Anything that can be made of metal can generally be made stronger and more weight-conscious by forged steel. The bonus of forged steel is that the metal becomes stronger than...
Packaging: Plywood Boxes
Min. Order: 1 Set/Sets
Model No.: SY6P
Forged steel Y type strainer we provided with ANSI standard. Forged steel Y type strainer we produced can cover size from 1/2" to 2" matching with pressure class 800 to class 1500 which widely used in hot oil system, power station, natuaral gas pipeline, water cycle system etc. The advantages of Y type stariner we...
Packaging: Plywood Boxes
Min. Order: 1 Set/Sets
Plug valves are a type of flow control valve that allow the user to increase or decrease flow by rotating the handle or other similar operation. The user may have to adjust the valve to the desired flow rate, with the valve able to hold the flow rate consistently and reliably. Other popular flow control valves include...
Packaging: Plywood boxes
Min. Order: 10 Set/Sets
Plug valves are valves with cylindrical or conically tapered "plugs" which can be rotated inside the valve body to control flow through the valve. The plugs in plug valves have one or more hollow passageways going sideways through the plug, so that fluid can flow through the plug when the valve is open. Plug valves...
Packaging: Plywood Boxes
Min. Order: 1 Set/Sets
Model No.: D041XR
Butterfly valve is from a family of valves called quarter-turn valves. In operation, the valve is fully open or closed when the disc is rotated a quarter turn. The "butterfly" is a metal disc mounted on a rod. When the valve is closed, the disc is turned so that it completely blocks off the passageway. When the valve...
Packaging: Plywood Boxes
Min. Order: 1 Set/Sets
Model No.: D541Y
The high-performance double offset butterfly valve, used in slightly higher-pressure systems, is offset from the centre line of the disc seat and body seal (offset one), and the centre line of the bore (offset two). This creates a cam action during operation to lift the seat out of the seal resulting in less friction...
Packaging: Plywood Boxes
Min. Order: 1 Set/Sets
Split ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it. The valve is open when the ball's hole is in line with the flow and closed when it is pivoted 90 degrees by the valve lever. The lever lies flat in alignment with the flow when valve open, and...
Packaging: Plywood Boxes
Min. Order: 1 Set/Sets
Model No.: Q541F
The ball of floating ball valve is moveable(not fixed by a trunnion) inside the valve body, it drifts toward to the downstream side and tightly pushes against the seat under the medium pressure to ensure sealing reliability. The floating ball valve is 2 pieces or 3 pieces body with split body, full port for pigging...
